From the free quote to the final rinse, pre-paint washing for brick in Union, MO follows a simple process: inspect, protect, clean, rinse and check. On brick, the method we use is low-pressure wash.
The right method for the job
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Cleaning brick safely
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
When to book pre-paint washing for brick
- You're about to paint or stain the house
- Chalky residue comes off on your hand
- Mildew or dirt under the old paint
Where the grime comes from
- Paint chalking as it ages
- Mildew that will grow through new paint if not killed
- Dirt that weakens adhesion
Safe steps for homeowners
- Ask your painter what prep they need
- Allow siding to dry for the time the paint maker recommends before painting
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Painting over mildew, which bleeds through
- Too much pressure that damages wood or drives water into the wall
- Painting before the wood is dry
What happens on the day
- Coordinate with your painter
- Protect plants and fixtures
- Kill mildew and wash the surface
- Remove loose chalk and dirt
- Leave the house to dry before painting
Pre-Paint Washing for Brick cost in Union, MO
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Pre-Paint Washing for Brick in Union, MO
Humid summers in Missouri grow green algae and black mildew on the shaded sides of homes, especially on vinyl and painted wood. A soft wash kills the growth rather than just knocking it off, so the siding stays clean longer.
We provide pre-paint washing for brick across Union (ZIP code 63084) and nearby towns including Villa Ridge (6.8 mi), Saint Clair (7.4 mi), Washington (7.5 mi) and Gray Summit (10.7 mi). Call (877) 658-5887 for a free quote in Union.
Pre-Paint Washing for Brick: frequently asked questions
How much does pre-paint washing for brick cost in Union, MO?
Pre-Paint Washing for Brick typically costs $250-$600 for a typical home exterior, and usually takes 2-4 hours plus dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.
Do you use high pressure for pre-paint washing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is pre-paint washing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pre-paint washing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.